APPLICATION: Printed on our innovative self-adhesive vinyl material. No extra tools, glue, paste or water needed for hanging. Our wall decals will adhere safely on any smooth or slightly textured surface. All of the wall decals are made to order & are hand finished. These wall art decals are simple to apply & easily removable without any damage to the surface. Just Peel and Stick!
Wall stick paste techniques and matters needing attention:
Encounter greater rich patterns, you can first wall along the blank part cut into small
units, and then fight good shape on the ground, one by one each small unit according to the position of sticking to the wall.
2. paste pattern
Paste without transferring the film pattern, the pattern of a first opened to the wall a preset position, and then a hand to reveal the inside story of paper, a hand gently
smooth wall stickers. If you accidentally posted the wrong position, don't worry, gently tear re paste can be, as long as the quality is good enough, the wall surface clean without dust, repeated 3-4 times posted no problem. Suggestions to design good layout before the paste and paste, too many repeated paste will also affect the sticking effect oh!
3. according to the tight edge
Pattern after a good stick, please go along the wall edge slowly according to tight compaction, can make the wall better and wall adhesion, prevent the edge. May be some pattern occurred early curling, please do not worry, it will tilt the part to tightly press, repeated several times after pattern will no longer tilted flat.
4. the use of transfer film
Have a hollow or silk complicated patterns, transfer film to the wall to wall effect, can help you put these patterns with more smooth. The transfer film can be reused, transfer film you receive is based on the pattern and size. The transfer film with patterns together, affixed to the wall, remember to press the transfer film and wall contact part
(only needs to press the pattern part), so as not to tear down the wall sticking transfer film together, damage to walls.
Don't be afraid of the vinyl wall art. It will not leave grossness on your walls, it will not damage your walls or windows, it will not be stuck there forever. You can change your mind, update your look, or leave it for years. You can smack it on the wall in no time.
1. Prepare the Decal
Lay each graphic sheet on a flat surface, white backing side up.
Press firmly over the entire sheet with the provided Luka squeegee or any other plastic card to make sure that the sticker transfers to the transfer paper.
2. Clean Your Surface
Before starting to re-designing your space with wall decals, Clean your wall or surface.
Be sure it is smooth, dry and free of dust and dirt. Just use a cloth to get the job done!
3. Plan the Layout
Plan you layout by cutting roughly around the individual graphics and arranging them on your surface using a masking tape until you are happy with your design.
Remember that you can remove the stickers once applied, but you will not be able to re-use them.
Apply even, firm pressure using the provided squeezer to avoid bubbles. Face the self-adhesive side of the sticker with the transfer sheet facing to the surface, start from a top corner and gently roll off the white backing from the transfer sheet.
Make sure that none of the sticker pieces is left on the backing paper, in case it does, simply stop peeling, roll back a bit & repress the decal onto the transfer tape.
Wall decals may be applied to hard, clean, smooth and dry surfaces. Some textured walls may not work well. Our wall decals are removable but not reusable! Please use caution when removing wall decals. Depending on the age or condition of the painted surface underneath, some touch ups may be necessary.
For detailed installation instructions please visit our help page section and see Wall Decals Installation Instructions.